F065
Diaméter Nominal Pipa Luar:
- Disarankeun ku Standar Perusahaan Peralatan Kriogenik HL. Éta ogé tiasa diproduksi numutkeun sarat konsumén.
- Tekanan Desain:
- Disarankeun ≤ 16 bar. Atawa pilih Jenis Sambungan Dilas (≤40 bar).
- Bahan Pipa Luar
Tanpa sarat khusus, bahan pipa jero sareng pipa luar bakal dipilih sami.
3.1.3 Jenis Sambungan Dilas
odel
Sambungan
Tipe
Diaméter Nominal Pipa Jero
Tekanan Desain
Bahan
tina Pipa Jero
Standar
Catetan
W010
00X
Jenis Sambungan Dilas pikeun Selang Fleksibel Berinsulasi Vakum Statis
DN10, 3/8"
8 ~ 40 bar
Baja Tahan Karat Seri 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diaméter Nominal Pipa Luar: | |
| Tekanan Desain | Bahan Pipa Jero. | A nyaéta 304, | DN40, 1-1/2" | C nyaéta 316, |
| D nyaéta 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Tekanan Desain |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Disarankeun ≤ DN25 atanapi 1". Atawa milih Tipe Sambungan Bayonet Vakum sareng Flensa sareng Baut (ti DN10, 3/8" dugi ka DN80, 3"), Tipe Sambungan Dilas (ti DN10, 3/8" dugi ka DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standar | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diaméter Nominal Pipa Luar: |
| Disarankeun ku Standar Perusahaan Peralatan Kriogenik HL. Éta ogé tiasa diproduksi numutkeun sarat konsumén. | Bahan Pipa Luar | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Tipe | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standar | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Tekanan Desain. | / | DN25, 1" | DN25, 1" | / | |
| Bahan Pipa Jero. | / | DN25, 1" | DN25, 1" | / | |
| C nyaéta 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diaméter Nominal Pipa Jero:
| Disarankeun ≤ DN25 atanapi 1". Atawa milih Tipe Sambungan Bayonet Vakum sareng Flensa sareng Baut (ti DN10, 3/8" dugi ka DN80, 3"), Tipe Sambungan Dilas (ti DN10, 3/8" dugi ka DN150, 6") | Diaméter Nominal Pipa Luar: |
| Disarankeun ku Standar Perusahaan Peralatan Kriogenik HL. Éta ogé tiasa diproduksi numutkeun sarat konsumén. | Tekanan Desain: |
| Disarankeun ≤ 16 bar. Atawa pilih Jenis Sambungan Las (≤40 bar) | Bahan Pipa LuarTanpa sarat khusus, bahan pipa jero sareng pipa luar bakal dipilih sami.3.2 Sistem Pipa Insulated Vakum Dinamis3/S |
| 3.2.1 Jenis Sambungan Bayonet Vakum nganggo Klem | odel |
| Sambungan | Tipe |
| Diaméter Nominal Pipa Jero | Tekanan Desain |
| Bahan | tina Pipa Jero |
| Standar | Catetan |
HDB01008
Jenis Sambungan Bayonet Vakum nganggo Klem pikeun Selang Fleksibel Berinsulasi Vakum Dinamis
lDN10, 3/8"
l8 bar
| Baja Tahan Karat Seri 300 C nyaéta 316, | Bahan Pipa Jero. | |
| A nyaéta 304, | B nyaéta 304L,C nyaéta 316,D nyaéta 316L, | |
| E nyaéta séjén. | HLH | DB01508 |
| DN15, 1/2" | Tekanan Desain: | Tekanan Desain: |
| DN20, 3/4" | Tekanan Desain: | Tekanan Desain: |
| DN25, 1" | Tekanan Desain: | Tekanan Desain: |
| Diaméter Nominal Pipa Luar: | Tekanan Desain: | Tekanan Desain: |
Disarankeun ≤ 8 bar. Atawa pilih Tipe Sambungan Bayonet Vakum sareng Flensa sareng Baut (≤16 bar), Tipe Sambungan Dilas (≤40 bar)Bahan Pipa LuarTanpa sarat khusus, bahan pipa jero sareng pipa luar bakal dipilih sami.
Kaayaan Daya:
HL-HX-X-Situs éta kedah nyayogikeun listrik ka pompa vakum sareng ngawartosan HL Cryogenic Equipment inpormasi listrik lokal (Tegangan sareng Hertz).-00-X
3.2.2 Jenis Sambungan Bayonet Vakum nganggo Flensa sareng Baut
odel
Sambungan
Tipe
Diaméter Nominal Pipa Jero
Tekanan Desain
Bahan
tina Pipa Jero
Standar
Catetan
Nominal Diameter of Inner Pipe
00X
8 ~ 16 bar
DN10, 3/8"
8 ~ 16 bar
Baja Tahan Karat Seri 300
Design Pressure
Tekanan Desain.
08 nyaéta 8bar,
16 nyaéta 16bar.
Bahan Pipa Jero.
A nyaéta 304,
B nyaéta 304L,
C nyaéta 316,
D nyaéta 316L,
E nyaéta séjén.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Séri Pamisah Fase Terisolasi Vakum | DN10, 3/8" | Arménia
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisDiaméter Nominal Pipa Luar:X | DN15, 1/2" | |||||
| PerancisDisarankeun ≤ 16 bar. Atawa pilih Jenis Sambungan Dilas (≤40 bar).X | DN20, 3/4" | |||||
| PerancisKaayaan Daya:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandia
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Perancis08 nyaéta 8bar,00X | jeung 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisSamoa00X | DN15, 1/2" | |||||
| PerancisBasa Sindhi00X | DN20, 3/4" | |||||
| PerancisTajik00X | DN25, 1" | |||||
| PerancisThailand00X | DN32, 1-1/4" | |||||
| PerancisUzbék00X | DN40, 1-1/2" | |||||
| PerancisXhosa00X | DN50, 2" | |||||
| PerancisZulu00X | DN65, 2-1/2" | |||||
| PerancisOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Kaayaan Daya:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Baja Tahan Karat Seri 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisDN15, 1/2"00X | DN15, 1/2" | |||||
| PerancisDN20, 3/4"00X | DN20, 3/4" | |||||
| PerancisDN25, 1"00X | DN25, 1" | |||||
| PerancisW03200X | DN32, 1-1/4" | |||||
| PerancisW04000X | DN40, 1-1/2" | |||||
| PerancisW05000X | DN50, 2" | |||||
| PerancisW06500X | DN65, 2-1/2" | |||||
| PerancisW08000X | DN80, 3" | |||||
| HSelang Jaket Vakum00X | DN100, 4" | |||||
| HKatup Pangatur Aliran Oksigén Cair Cina00X | DN125, 5" | |||||
| HHarga Grosir Cina Cina Tangki Standar ISO 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistem Pompa Vakum Dinamis00X | Séri Pamisah Fase Terisolasi Vakum | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisWhatsapp00X | DN15, 1/2" | |||||
| PerancisWeChat00X | DN20, 3/4" | |||||
| PerancisJerman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Yunani
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Denmark
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Arménia
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHÉstoniaX | DN15, 1/2" | |||||
| HLHFrisiaX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandia
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoa00X | DN15, 1/2" | |||||
| HLHDBasa Sindhi00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDThailand00X | DN32, 1-1/4" | |||||
| HLHDUzbék00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
